菜單
菜單

2024312星期二 14時2148

聯系方式
    聯系方式
  • 電話:13827236739
    電話:13066193998
  • 微信:13066193998
  • 郵箱:msg@www.485mrv.cn
周一至周六 8:00 - 20:00
業務微信
業務微信
夏陽官方網站背景圖
技術資料
DATA
鎢鋼性能表  Tungsten steel performance table
品種分類    Sorts 材質Grade HIP CIP 顆粒        Grain Co(%) 比重 Density g/cm3 硬度Hardness 抗彎強度T.R.S 用途                                                  Applications
HRA HV N/mm2
耐磨系列  Wear-resistant M10 超細Superfine 6 14.8 94 1900 3800 常用粉末冶金模具,也可用于刀片、密封環                 Often  used for powder metallury dies,and blade,chip.sealed ring and gasket ring.
M20 中medium 6.5 14.88 91 1550 3100
M30 中medium 8 14.62 89.5 1400 3200 硬度高,很好耐磨性,通用抽拉模具                         High hardness,wear-resistant,used widely in common drawing dies.
M33 超細fine 8 14.6 92 1700 3800 常用于較硬材料的拉深模                                Used widely in drawing dies which is for high rigidity mat'l
耐磨     耐沖擊系列   Wear&      impact-resistant serices C10 中medium 10 14.3 89 1200 3430 韌性、硬度極佳,是常用沖頭、襯套、入子、鑲件較好材料,也是成形模具、卷圓模、軋形模、應力較大拉深模不錯材料選擇  Tonghness and hardness are good,widely used in punches,bushes.cavity inserts,core inserts.You also can choose this material for forming dies,curling circle dies,roll shape dies,bid stress drawing dies.
C30 中medium 15 14.2 87 1070 3500
C15 細fine 13 14.06 91 1550 3600 適用于精密五金薄片沖壓、引線框、IC模,不適用厚片沖壓    
Used for punching precise hardware,ironware sheets,guiding frame,IC dies.Can't be used for puknching thick sheets.
C35 細fine 15 13.85 89.5 1320 3700 通過各類薄片沖壓、引線框、LED支架、IC模、電機定轉子等   
Used commonly for sheet punching,guiding frame,LED frame.IC dies,rotor-stator.
C38 中細   Medium fine 12 14.2 89 1400 3300 專用矽銅片、EI片沖壓                                  Used for punching steel sheet,E&I sheet.
C78 細fine 12 14.1 90 1450 3950 專用線切割、電火花加工場合                             Can be used specially when wire cut,EDM.
C40 粗tongh 20 13.6 84 850 2850 常用冷沖、冷鐓、冷擠模具                              Used in common cold punching dies,cold heading dies,cold extruding dies.
C50 粗tongh 22 13.4 83 780 2950 應用于應力較大的場合,如螺絲、螺母、鍛造等             Used when stress is big,such as screw,screw nut forging dies.
超微粒系列 QX05 微superfine 7 14.6 94 1950 3520 極高硬度,只適合沖擊力較小耐磨件,刀具               Superhigh hardness,only used for small impacts and knife.
QX10 微superfine 8 14.6 92.8 1730 3800
Supering grade QX20 微superfine 10 14.45 91.8 1550 4200
QX30 微superfine 12 14.15 92.3 1640 4000
高溫系列 Hear resistant R20 中medium 專利patent 13 83 780 2550 熱鍛模                                               Used in hot forging dies.
R50 中medium 專利patent 13.2 84 850 2550 熱擠中小型型材,熱鍛模                               Medium and small sections extruded,hot forging dies.
非磁性系列 W10 中medium Ni 14.3 89.5 1320 1500 應用于應力較小的無磁性磨件                            Used in non magnetic wear resistant parts whose's stress is small.
W10X 細fine Ni 14.3 92 1760 2700 常用磁性成型模                                        Used in common magnetic forming dies.
Non magnetic W30 中medium Ni 14 87 1160 3000
W35 細fine Ni 13.8 86.5 1070 2900
W40 中medium Ni 13.5 85.5 930 3000
本公司保留以上參數變更權利
wgxnb
鎢鋼性能表                                              
品種分類    Sorts材質GradeHIPCIP顆粒 GrainCo(%)比重 Density g/cm3硬度Hardness抗彎強度T.R.S用途 /Applications
HRAHVN/mm2
耐磨系列  Wear-resistantM10
超細Superfine614.89419003800常用粉末冶金模具,也可用于刀片、密封環                 Often  used for powder metallury dies,and blade,chip.sealed ring and gasket ring.
M20中medium6.514.889115503100
M30中medium814.6289.514003200硬度高,很好耐磨性,通用抽拉模具                         High hardness,wear-resistant,used widely in common drawing dies.
M33超細fine814.69217003800常用于較硬材料的拉深模                                Used widely in drawing dies which is for high rigidity mat'l
耐磨     耐沖擊系列   Wear&      impact-resistant sericesC10
中medium1014.38912003430韌性、硬度極佳,是常用沖頭、襯套、入子、鑲件較好材料,也是成形模具、卷圓模、軋形模、應力較大拉深模不錯材料選擇  Tonghness and hardness are good,widely used in punches,bushes.cavity inserts,core inserts.You also can choose this material for forming dies,curling circle dies,roll shape dies,bid stress drawing dies.
C30中medium1514.28710703500
C15
細fine1314.069115503600適用于精密五金薄片沖壓、引線框、IC模,不適用厚片沖壓    
Used for punching precise hardware,ironware sheets,guiding frame,IC dies.Can't be used for puknching thick sheets.
C35
細fine1513.8589.513203700通過各類薄片沖壓、引線框、LED支架、IC模、電機定轉子等   
Used commonly for sheet punching,guiding frame,LED frame.IC dies,rotor-stator.
C38
中細   Medium fine1214.28914003300專用矽銅片、EI片沖壓                                  Used for punching steel sheet,E&I sheet.
C78
細fine1214.19014503950專用線切割、電火花加工場合                             Can be used specially when wire cut,EDM.
C40粗tongh2013.6848502850常用冷沖、冷鐓、冷擠模具                              Used in common cold punching dies,cold heading dies,cold extruding dies.
C50粗tongh2213.4837802950應用于應力較大的場合,如螺絲、螺母、鍛造等             Used when stress is big,such as screw,screw nut forging dies.
超微粒系列QX05
微superfine714.69419503520極高硬度,只適合沖擊力較小耐磨件,刀具               Superhigh hardness,only used for small impacts and knife.
QX10
微superfine814.692.817303800
Supering gradeQX20
微superfine1014.4591.815504200
QX30
微superfine1214.1592.316404000
高溫系列 Hear resistantR20
中medium專利patent13837802550熱鍛模                                               Used in hot forging dies.
R50
中medium專利patent13.2848502550熱擠中小型型材,熱鍛模                               Medium and small sections extruded,hot forging dies.
非磁性系列W10中mediumNi14.389.513201500應用于應力較小的無磁性磨件                            Used in non magnetic wear resistant parts whose's stress is small.
W10X細fineNi14.39217602700常用磁性成型模                                        Used in common magnetic forming dies.
Non magneticW30中mediumNi148711603000
W35細fineNi13.886.510702900
W40中mediumNi13.585.59303000
本公司保留以上參數變更權利                                                                  


img_load
可滑動屬性表查看所有內容
国产AV天堂一区二区三区。,天地资源在线观看高清,免费观看国产一区二区三区,亚州中文字幕午夜福利电影 久热官网| 91精品国产福利尤物| gogogo高清免费观看日本电影| 日韩精品欧美在线视频在线| 人妻无码| 亚洲精品成A人在线观看| 人妻无码| 欧美日韩国产激情一区| 亚洲一区二区三区在线视频| 精品一区精品二区|